Physical Address

304 North Cardinal St.
Dorchester Center, MA 02124

Skullcandy Wireless Earbuds Indy Evo not pairing together – How To Fix

The Skullcandy Indy Evo are excellent headphones for viewing movies, listening to podcasts, and listening to music. Despite this, a number of customers have reported that their Skullcandy Indy Evo headphones do not connect properly. I am aware of how difficult this is for you. When you are listening with one earbud, you will find that you want to switch to the other earpiece. You experiment by pressing a variety of buttons, but nothing happens.

You don’t need to become frustrated since there are straightforward solutions to this pairing problem. If your Skullcandy Indy Evo earphones are not connecting with each other, here is how to repair the problem.

You need to reset and restart these earphones since reverting them back to factory defaults will get rid of any small bugs and overload. After being reset, the earbuds will probably be able to connect to one another.

We have provided instructions below on how to reset and restart your Skullcandy Indy Evo so that it functions properly again.

How to Fix Skullcandy Indy Evo Not Pairing Together?

Unpair your earphones from your electronic device before attempting any of these solutions. Also, delete the Skullcandy Indy Evo earphones from the list of devices that are connected to your Bluetooth.

1. Reset Skullcandy Indy Evo Earbuds

There may be an issue with the software on your Skullcandy Indy Evo earphones if you are unable to link them together. As a result, you should reset them in order to get rid of any errors and malfunctions of any type.

The following is an in-depth tutorial that will walk you through the process of resetting your Skullcandy Indy Evo earphones.

  • Take both earbuds out of the case where they were charging.
  • Both buds include a button in the middle that must be pressed and held down for ten seconds.
  • Your Skullcandy Indy Evo earphones will automatically reset themselves after ten seconds.

After that, you should start by connecting them to your smartphone, and then after that, you should attempt to connect both buds to one another.

2. Restart Skullcandy Indy Evo Earbuds

If your Skullcandy Indy Evo earphones still won’t connect with each other after you’ve tried to reset them, read this. If this is the case, you need to restart your earphones. Additionally, it fixes software issues such as bugs and malfunctions.

Here is how to reset the Skullcandy Indy Evo earphones so that they are ready for use again.

  • First, take both earbuds out of the case in which they are charging.
  • Hold both of the buds in your hands for a total of six seconds.
  • Your headphones do not have any volume.
  • After placing the buds in the case and waiting for both of them to turn red, remove the buds from the case.
  • At this point, the lights on both buds will come on by themselves.

Put both earbuds into the carrying case that charges them, and then connect them with any device. And then take them out of the case and let the automated pairing to take place. It is hoped that they will find common ground. If it doesn’t work, go on to the next solution.

3. Restart Your Device

If the problem persists, your Skullcandy Indy Evo headphones are not compatible with each other. Then you need to restart the gadget that you’re using. After that, connect your earphones to the device and check to see whether they are compatible with one another after pairing them.

4. Enable & Disable Bluetooth

Another thing you may try is enabling and disabling Bluetooth on the device you’re using. It is recommended that you turn off Bluetooth on your device and unpair your Skullcandy Indy Evo headphones. After that, turn on the Bluetooth on your smartphone, and couple it with the new accessory.

This patch has been successful for many consumers, as shown by the fact that their earbuds are now able to connect with one another.

Contact Customer Support

If none of the solutions shown above worked for you and your Skullcandy earbuds still won’t connect with each other, try the following:

It’s possible that you need to get in touch with Skullcandy’s customer service. They are able to explain the steps that you need to do in order to resolve this issue.

You should familiarise yourself with these aspects of your Skullcandy Indy Evo earphones before we make contact.

  • The model number for the earbuds.
  • The earbud’s unique identifier or serial number.
  • Specifics on the date, time, and vendor of the purchase.
  • Any details on the terms of the warranty.

After that, they will tell you what you can do. Or if your buds are under warranty how you can replace them.

Video Guide

Final Thoughts

The Skullcandy Indy Evo pairing issue should be resolved if you follow the troubleshooting advice provided in this article. If this is not the case, it is probably time to get in touch with Skullcandy for some more guidance.

Tell us in the comments if you found that this post about Skullcandy Indy Evo not pairing together was helpful to you. If you were able to profit from it. Also, be sure to share this information with others who are dealing with the same issue.

Leave a Reply

Your email address will not be published. Required fields are marked *