Physical Address

304 North Cardinal St.
Dorchester Center, MA 02124

My Turtle Beach headset wont turn on: How To Fix

There is a possibility that even after charging your Stealth 700 headset, you will discover that it does not switch on. Some users have even reported that after receiving their brand new headset, they were unable to switch it on in any way. You should not, however, go ahead and throw away your headset just yet since there is still a possibility that they may be salvaged.
When your Stealth 700 Headset won’t switch on, downloading a recovery programme to your computer is the most effective approach to solve the problem and get it working again. Verify that you are familiar with the version of the Stealth 700 headset that you possess in order to successfully download the appropriate software.

Continue reading to learn all of the steps you need to do to download and utilise the recovery programme to repair your headset, as well as some of the troubleshooting actions you may perform if any issues occur while you are performing the steps.

How to Recover Stealth 700 Gen 2 PS Headset

  • The Stealth 700 Gen 2 PS recovery utility may be downloaded from this page. Using the improper recovery tool will need a call to Turtle Beach’s customer service department.
  • Plug the headset into your computer using the USB-C cable that comes with it. This procedure will not work with a USB transmitter.
  • Open the recovery tool file you just downloaded by double-clicking on it.
  • In this new window, you’ll be prompted to double-check that your headset is connected through USB. When Windows Defender asks for permission, click “Yes” and “Allow Access.” Several windows will appear and the process should complete in about five minutes. None of the windows should be touched.
  • “Programming Complete.” will appear in a dialogue window. Once the operation is complete, please remove and restart your headset.” Once you’ve unplugged your headset, click “OK.”
  • Make sure you have the Turtle Beach Audio Hub installed on your computer. Open Audio Hub and connect your headset and transmitter to your PC. The headset should be detected by Audio Hub, which will then offer you to do a firmware upgrade on the headset. I estimate that the update will take around five minutes.
  • Make sure your headset is connected to the USB transmitter by plugging it in.
  • Plug up the USB transmitter to your PlayStation using the PlayStation’s controller port. The LED will flash twice to indicate that the headset is being sought.
  • In order to turn on the headset, press and hold the headset’s power button. When it’s looking for the transmitter, its LED should flash twice.
  • The headset should say “headset paired” and both LEDs should be solid to indicate a successful connection.
  • The recovery tool will wipe all prior pairings, so you’ll have to do it all over again if you wish to connect again.

How to Recover Stealth 700 Gen 2 Xbox Headset

  • The Stealth 700 Gen 2 Xbox recovery utility may be downloaded from this page. Using the improper recovery tool will need a call to Turtle Beach’s customer service department.
  • Plug the headset into your computer using the USB-C cable that comes with it.
  • Open the recovery tool file you just downloaded by double-clicking on it.
  • In this new window, you’ll be prompted to double-check that your headset is connected through USB. Allow access by clicking “Yes” and “Allow Access” in the window that pops up. Several windows will appear and the process should complete in about five minutes. None of the windows should be touched.
  • “Programming Complete.” will appear in a dialogue window. Once the operation is complete, please remove and restart your headset.” Once you’ve unplugged your headset, click “OK.”
  • Connect your Xbox One headset:
  • Open the console and start playing. In order to signal that it is looking for the headset, its LED will flash swiftly.
  • In order to turn on the headset, press and hold the headset’s power button. When the headset says “Connection Bluetooth,” you should push the button adjacent to the LED to complete the pairing process. When it says “Pairing Headset,” you’ll know it’s working.
  • To confirm a good connection, both LEDs should become solid.
  • The recovery tool will wipe all prior pairings, so you’ll have to do it all over again if you wish to connect again.

How to Reset Your Stealth 700 Headset

Resetting your headset to factory settings is a simple repair for most headset problems. Performing a factory reset might help remove any potential interference with the headset’s proper operation.

For around 20 seconds, hold down the Bluetooth and Mode buttons. When the reset procedure begins, the blue LED will go off.
Headsets may now be activated.

Why Your Stealth 700 Keeps Turning Off

Your headset may turn itself off from time to time. When this happens, it’s usually due of a timer that recognises game or microphone sounds. It will automatically switch off if it detects no sound for an extended period of time. You should be able to hear a warning before this happens so that you are aware of the shutdown.

Another possible explanation for your headset turning off at random is that you have too many applications open at the same time. Interfering with the connection may be caused by some programmes, and some devices have a restriction on the number of apps that can be running at the same time. Check to determine whether your headset is working properly by limiting the amount of programmes running, even if they are in the background.

How to Fix a Stealth 700 Headset that Isn’t Charging

It’s possible that your headset won’t turn on because it hasn’t been charging. It’s possible that you could try:

  • Make sure the charging cord or port isn’t damaged before trying to charge your phone. Blow away any dust or dirt, then check the pins to see if any of them are crooked.
  • Use an alternative charging cord that is still compatible. It’s possible that the cable you’re presently using is defective.

Because there is no straightforward cure for problems with the charging port or battery, you will have to purchase a new headset if you discover one is broken. Changing the battery is possible, but it is usually more convenient and less expensive to buy a new set.

Video Guide

Leave a Reply

Your email address will not be published.