Physical Address

304 North Cardinal St.
Dorchester Center, MA 02124

Is The PlayStation 4 Waterproof?

There is always a potential that the Playstation 4 system or its controllers may be exposed to liquids at some time, regardless of whether you are traveling with them in a luggage, playing them at a house or office, or any combination of these things.

To answer your question, the PlayStation 4 and all of its attachments are not waterproof. The consoles and controllers for the PlayStation 4 are not water resistant. The internal components of the PlayStation 4, such as the fan, buttons, and GPU, do not have coverings that protect them from liquids, and as a result, they are susceptible to harm if the console is immersed in liquid.

It is in your best interest to keep your gaming console, its controllers, and any other accessories as dry as possible and to keep them away from any accidental spills. If you have had any spills and are concerned about the continued functionality of your system, the steps that are outlined below may help you ensure that it will be able to turn back on again.

I also discuss some of the most effective methods for avoiding damage to your priceless console and accessories in general, allowing you to enjoy your gaming experience free from anxiety.

The PS4 Console’s Clever Water-Resistant Top Layer

Is The PlayStation 4 Waterproof?

Although Sony has not officially stated that the design of the PlayStation 4 is not waterproof or water-resistant, they have incorporated some clever design elements into the console that, by nature, can shield small spills of liquids. Despite this, Sony has not officially stated that the design of the PlayStation 4 is not waterproof or water-resistant.
If you examine the top edge of the PS4 and the PS4 Pro, you will find that the surface is entirely made of plastic and does not include any cutouts or apertures of any kind.

It is more difficult for trash and liquids to enter the console since the holes and cooling vents have been moved to the sides and rear of the device. This is in contrast to the situation in which they were positioned on top (check out the Xbox One by comparison).

The fact that the top surface of the PlayStation 4 console is made of a flat and hard plastic gives the system a fighting chance to continue operating normally in the event that a small accidental spill occurs. However, this does not mean that the PlayStation 4 console can handle all types of spills.

The PS4 Has Many Exposed Openings

Aside from the top cover, which is designed to seem like a blank slate and is shown on the console, the PlayStation 4 has apertures exposed pretty much everywhere else.
There is a disc drive and buttons that control the game eject and power on operations on the front side of the device. Additionally, there are USB ports that allow for the connection and charging of other peripherals.

In the rear of the PlayStation 4, you’ll find an aperture for air ventilation as well as all of the ports that link the console to the display and the power supply unit.

Last but not least, the PS4’s flanks have additional vent ports that are accompanied by rotating fans that contribute further to the console’s cooling.

It goes without saying that there are a variety of entry points via which liquid may enter the system.

Your Controllers Are Also Delicate

The console’s saving grace is that it has a hard top-hat construction with no apertures; however, the PS4 controllers have several openings that make it easy for dirt and liquid to enter.

These apertures include the buttons, joystick, and triggers, all of which need a flat, dry, and smooth surface in order to function to the best of their abilities.

Be especially cautious with the micro-USB port that is located on the front of the controller. Because of the controller’s low and downward-facing design, this port is one of the areas that has the potential to be exposed to liquids initially.

So What If I Spilled on My PS4?

Even if you accidentally got a drop or two of liquid on your PlayStation 4, there is a chance that the console will continue to function normally.

Wipe the liquid off the console, wait until the affected area is totally dry, and then continue using the system as you usually would.

Wipe away any liquid that you see on the console if the spill was significant and the system does not switch on. However, do not spin or jiggle the device in an attempt to get the liquid out from the inside.

Moving the wet console about while it is still wet may allow other components to get submerged, which may result in more damage than was first sustained.
Wait until the liquid has dried completely while maintaining the system’s original position, and then make another attempt to turn on the console once the liquid has dried.

If the PlayStation 4 will not turn on after you have allowed sufficient time for the liquid to dry, you may remove the console gently, let all of the internal components to be exposed to fresh air, and clean each part using at least 90 percent isopropyl alcohol and a gentle brush.

What Components Are Usually the First To Go When It Comes to Liquid Damage?

If you are attempting to repair a PlayStation 4 that has been damaged by water, it is best to be aware of some common culprits that are especially prone to breaking first so that you do not have to order a ton of parts right off the bat. If you are not aware of these common culprits, you may end up having to order a lot of parts than you originally anticipated.

Drive for Blu-Ray Discs: Because it is one of the components that is most susceptible to damage from liquids, the blu-ray drive should be one of the first locations that you check while repairing a PlayStation 4 system. It is possible for water to enter into the slot and damage the optical lens that scans the game disc, particularly if the spill occurs on the front of the device.
A Source of Power: The power supply on the PS4 is known to be very vulnerable to damage caused by liquids due to the fact that it is exposed via the rear vents and the power block connector. When the console is being dismantled, it is important to check for moisture. If your computer doesn’t make any sounds or exhibit any other indications of life when you attempt to turn it on, the problem is almost certainly with the power supply. This is particularly the case if the spill happened along the back side of the PlayStation 4 (PS4).
Fan: The PlayStation 4, which has a stealthy and small design, also includes a fan that is very open and rotates quickly. This is done to ensure that the close-packed components can remain cool enough to run at their optimal levels. This fan forces the heated air out of the PS4 via the wide apertures that run along the edges of the console, creating a large number of entry points for liquids. During gameplay, this component will most likely need to be replaced if it has been corroded, if it makes a louder noise, or if it does not operate at all.

Best Ways to Prevent Future Spills On Your PS4

Maintaining a dry environment for your system will keep it running faultlessly for years to come. Perhaps you were the unfortunate victim of the terrible PS4 liquid spill, or perhaps it’s nerve wracking playing your system in an area that might be prone to these catastrophes. Either way, it’s important to keep your system in a dry environment.

There is nothing quite like saving money, and this is particularly true with unneeded repairs to electrical devices.

Here are some of the most effective strategies that I’ve come across for protecting your PlayStation 4 and saving money so that you may invest in some brand new games.

Keep Your PS4 Up High

The majority of PlayStations that sustain damage from spilled liquid do so because the consoles are kept on the same level as beverages and faucets.

It may seem to be more practical if you kept your console on a table, such as a coffee table, a counter, or a night stand. Having your system located in the same locations as liquids, on the other hand, significantly increases the danger of harm caused by unintentional spills.

If you have a tall dresser, shelf, or storage container, these are the ideal locations to position your PlayStation 4 so that it is above (and away from) any sources of liquid. If you don’t have any of these things, the floor is the next best option.

Be sure to keep in mind that the higher you position your system off the ground, the more stable it will be. This will ensure that there won’t be any drops in the system too.

Get A PS4/Pro Dust Cover

Let’s be honest: we go into intense Call of Duty streaks, but we have to leave our PS4s behind for things like work, travel, school, etc., and we have to cross our fingers that it wasn’t broken in any manner before we went back to it. Agreed?

It is important to keep your PlayStation 4 covered so that no dirt or fluids may get into the portions of the console that are exposed and open. Putting a towel on top of the device is one approach of achieving this goal.

Or Keep It in a Rugged Waterproof Travel Case

We take the same precautions with them as we do with all of the other products that we pack, ensuring that they are safe and housed in compartments that are, ideally, free from water.
There is little doubt that the PlayStation 4 is not an exception, since its performance may be severely hindered by any shaking, debris, or fluids that may have entered the system while it was being transported.

Do not pass up this rough and tumble beast if providing your gaming system with the utmost safety while it is in transit is one of your top priorities. Case Club designed the clamshell with tight clasps and waterproof gaskets around both mouths to ensure that nothing would be able to access the contents of the case while it is being transported.

They also included custom-fit foam cushioning that snuggly cradles your console, two controllers, and your cords so that you don’t have to go for another watertight case to put them in.

This prevents them from moving about, preserving the pristine condition of both the console and the controllers while also preserving the position of the components.

Leave a Reply

Your email address will not be published.