Physical Address

304 North Cardinal St.
Dorchester Center, MA 02124

How To Turn On Laptop Without Power Button Using Keyboard

In the event that you have been using your laptop for an extended period of time, it is highly likely that several of its components may begin to break over time. Aside from the principal components installed on the inside of your laptop, this also includes smaller items such as ports, keyboard keys, and even the power button on the front of your laptop’s case.

A damaged power button may be extremely aggravating, as even turning on your laptop can be tough when the button is not functioning properly. We’ve put together a comprehensive guide on how to turn on a laptop without using the power button to assist you in this endeavor. By the time you reach the end of this guide, you will have learned about a variety of different approaches to the problem.

Laptop Power Button Not Working: How to Install a New Power Button?

Try putting a new power button on your laptop before proceeding to one of the several ways for how to switch on a laptop without the power button that are listed down below. This is owing to the fact that having a physical power button that is functional is significantly faster and easier to use than using any of the methods listed below in their entirety. You may do the same thing by following these procedures, which are largely the same for most laptops in most cases:

  • To begin, locate and order a power button that is compatible with your laptop and is made just for it.
  • Then, using a screwdriver and prying tools, remove the bottom cover of your laptop and open it up from the inside.
  • Once you’ve gotten inside, you’ll need to remove the entire motherboard as well as the keyboard in order to get to the rear of your power button.
  • Finally, unscrew the power button and replace it with the new one. Before you shut down your laptop, be sure that it is properly connected to the motherboard along with all of the other motherboard connections.
  • You may then turn on your laptop with easily by pressing the newly placed power button on the side of the laptop.

Step by Step Guide: How to Turn on a Laptop without the Power Button

Those of you who are unable to locate a power button or who are awaiting the availability of a power button will still wish to use your laptop even if the power button is not available. Unfortunately, as long as your computer runs Windows, you will have a huge variety of options for turning on your laptop without the use of a physical power button. In fact, you can use one of the following approaches to get the same result:

Using a Keyboard

One of the quickest and most convenient ways to turn on your laptop without using the power button is to use the keyboard that came with your laptop. If you have a laptop, you can enable this setting from the BIOS, as seen in the image below:

  • While powering on your laptop, hold down the F2, F10, or the DEL keys to boot into the BIOS instead of the Windows desktop environment.
How To Turn On Laptop Without Power Button Using Keyboard
  • Here, navigate to the Power Management options, where you should be able to discover the Power on by Keyboard feature or anything along those lines.
  • Then, by pressing the F10 key, you can enable this option and exit.
  • When your laptop is shut off, you can press any key on the laptop keyboard to bring it back up to full functionality.

Using the Motherboard

If you are unable to switch on your laptop in the first place in order to enter its BIOS for the purpose of altering the keyboard or other settings, you may be forced to use this hardware-based way to accomplish the task. However, while it is not recommended for routine use, powering on your laptop by using the motherboard can be a realistic solution in some circumstances, as illustrated here:

  • Starting with the bottom cover of your laptop, open it up and carefully remove its motherboard with the proper tools.
  • Once the motherboard has been removed from the chassis, check to see that all other connections are still in good working order.
  • Then, using a metal screwdriver or a wire, you may disconnect the power button connections from the motherboard and short the pins 1 and 3 together, which will immediately switch on your laptop and save you time.
  • After that, you’ll be able to access the BIOS and make any necessary changes to the motherboard’s settings.

With the Clock Battery Method

The clock battery method is another hardware way that you can use to switch on a laptop if you do not have access to the main power button. While it is possible to reset the BIOS settings on your laptop using this approach, it is significantly faster than the motherboard method described here:

  • To begin, you must first open up your laptop by removing the bottom shell with a screwdriver and extracting tools from underneath it.
  • To complete this step, unplug the battery cable from your motherboard, which is separate from the charging wire for your laptop.
  • After that, you can remove the clock battery or the CMOS battery from your laptop motherboard and put it aside.
  • Connecting your battery will immediately switch on your laptop, allowing you to quickly enter the BIOS if necessary.

With a Wall Socket

Some computers, similar to the prior clock battery approach, also allow you to force start a laptop using the wall socket laptop charger, which is similar to the previous clock battery method. Using this method will also require you to access your laptop by following the steps outlined below:

  • In order to access the motherboard of your laptop, you must first open it up with the proper tools and remove the bottom cover.
  • Remove the battery cable from your motherboard and attach your laptop charger to the other end of the cord to your motherboard.
  • As soon as your laptop receives electricity from the wall, it will switch on immediately, allowing you to access it without difficulty.

Using the Laptop Lid

While you may already be using your laptop’s lid to put it to sleep, you should be aware that it may also be used to turn on your laptop even when it is totally off. In order to accomplish this, you must make the following changes to your BIOS:

  • Hold the F2, F10, or the DEL keys for a few seconds after powering on your laptop via the power button or one of the hardware methods described above. This will allow you to reach the BIOS.
  • Once you have gained access to the same, select the Power Management or Power Settings tab from the drop-down menu.
  • Find and enable the Power on with Open Lid option in this section, and then save your changes by pressing F10.
  • It will now automatically switch on anytime you open the lid of your laptop, eliminating the need to press the power button every time.

Using Wake On LAN

In the same way that you may use the keyboard and the lid of your laptop to switch on your computer, you can also utilise its LAN connection to turn on your computer without using the power button. However, like other comparable capabilities, this one must be enabled from the BIOS, as follows:

  • To begin, you must first gain access to the BIOS by utilizing one of the options outlined earlier in this tutorial.
  • After that, navigate to the Power Management section and enable the Wake on LAN feature, which you can save by pressing the F10 key on your keyboard.
  • Afterwards, navigate to the Device Manager in Windows by hitting the Windows Key + X combination.
  • Locate and open the Properties window for your network adapter, where you must select the Allow this device to wake the computer option from the Power Management menu.
  • On the Advanced tab, you will also need to enable the Wake on magic packet option, which can be found under the Advanced tab.
  • At the end of the day, you can turn on your laptop using its LAN connection by utilizing any supported router or networking application installed on any other device on your network.

Video:

Conclusion

Even if you want to have a replacement power button placed on your broken laptop, you should continue to make use of the one that is there until you can have your laptop repaired. As a result of this, all laptops include a number of auxiliary power buttons in addition to the primary power button. In point of fact, we have previously provided a comprehensive instruction on how to carry out these steps, which can be seen up above.

Because there are several other approaches described in this article, you may quickly get access to your laptop by using one of these strategies rather than the power button. Make sure to provide your feedback in the comments area after reading all of the information on how to switch on a laptop without using the power button if you have already done so. In addition, if you have any queries, you are welcome to put them down there!

Conclusion

Although you may like to have a new power button installed on your malfunctioning laptop, you should continue to use it until your laptop has been serviced or replaced. As a result, all laptops include a number of different ways to switch them on other than by pressing the main power button. In fact, we’ve already provided a comprehensive instruction on how to go about it up above in the first place.

Because there are numerous methods stated below, you can easily access your laptop by using one of these methods instead of the power button, which is more convenient. Make sure to give your thoughts on this topic in the comments area once you have read through all of the information on how to switch on a laptop without using the power button. If you have any questions, you can also ask them in the comments section.

Leave a Reply

Your email address will not be published. Required fields are marked *