Physical Address

304 North Cardinal St.
Dorchester Center, MA 02124

How To Pair Your AfterShokz Headphones?

AfterShokz has rapidly increased its market share because to the distinctive and high-quality products that it offers. Therefore, just as with other types of wireless headphones, you will need to be familiar with how to connect the AfterShokz headphones.

How To Pair Your AfterShokz Headphones?

You will first need to set the AfterShokz Headphones into pairing mode on both ends of the device, and then you will need to enable Bluetooth on the device you are using in order to make the connection. Begin the process of activating the pairing mode on the AfterShokz headphones by pushing and holding the volume up button on the headset for between 5 and 10 seconds constantly.

At this point, the LED light on your headphones will begin flashing red and blue, and you will hear a voice prompter utter the word “pairing.” This will let you know that your AfterShokz headphones are powered on and ready to be linked with your device.

How to pair AfterShokz headphones with a Mac?

In order to successfully link AfterShokz headphones with a Mac, please do the following:

  • Put the AfterShokz headphones into active use. Now, hold down the button labelled “Volume Up” for at least five to ten seconds.
  • The headphones will now be in the pairing mode when you do this.
  • Turn on either the MacBook or the iMac.
  • A representation of an Apple logo should appear in the upper left-hand corner of the display.
  • After clicking on it, go to the System Preferences menu.
  • Locate the Bluetooth icon on your device, and then click on it to bring up the Bluetooth page.
  • You are now able to search for new Bluetooth devices after you have turned on Bluetooth.
  • Your MacBook will now begin looking for nearby Bluetooth devices once it detects this change.
  • After it has located the AfterShokz Bluetooth headphones, you can start the process of connecting them by clicking on the AfterShokz logo.
  • When you have finished connecting the headphones to the MacBook, choose the option “Ok” from the menu.
  • The AfterShokz headphones and a Mac may now be used together successfully when this step is finished.
How To Pair Your AfterShokz Headphones?

How to pair AfterShokz headphones to Android?

In order to connect the AfterShokz wireless headphones to an Android smartphone, please do the following:

  • Turn on the AfterShokz headphones, then activate the pairing mode on the controls.
  • To access the Settings menu on your Android smartphone, follow these steps:
  • Locate the settings for the Bluetooth, and make sure it’s turned on.
  • After you have done so, a list of the devices that have been associated will appear. In the event that you do not find the AfterShokz there, you will need to hunt for new gadgets.
  • Once it identifies the headphones, the phone will begin looking for them and will add them to the list once it finds them.
  • After the name has been added to the list, you may pick it by clicking on it. After that, choose the Pair option.
  • When the pairing is finished, you will get a notice on the phone and presumably also on the headphones themselves – this is analogous to the pairing process for the altec lansing speakers!

How to pair AfterShokz headphones to iPhone or iPad?

Select your headphones from the list once you find them there, and then click the Pair button.
Once the connection has been established successfully, the pairing process will be finished, and you will be able to use the AfterShokz headphones with either the iPhone or the iPad. After the connection has been successfully made, you may additionally hear a notice of this fact over the headset.

How to pair Aftershokz headphones with Windows 10

Aftershokz headphones may be paired with Windows 10 in the following ways:

  • After you have turned on your AfterShokz headphones and pressed the volume up button for around ten seconds, the headphones will enter the pairing mode.
  • Launch the Settings app on your device. To activate Bluetooth, go to the “Bluetooth & Devices” menu option.
  • To add devices, click the “Add Devices” button.
  • When you choose Bluetooth, your system will automatically search for other Bluetooth devices within range once you make your selection.
  • When the Aftershokz headphones show in that section, choose them, and the pairing process will start.

When the pairing has been completed successfully, a notice will appear on the computer, and you may also get an audible notification on the AfterShoz Bluetooth headphones.
Please take into consideration that the AfterShokz headphones and the laptop must be within a distance of 9 metres from one another in order for the connection to be successfully created.

How to pair AfterShokz headphones with Smart TV?

  • Turn on the AfterShokz headphones and put them in pairing mode by following the instructions outlined in the previous paragraph.
  • Turn on the Smart TV and go to the Settings or Device menus using the remote control.
  • At this point, you will need to seek for the options for connection or Bluetooth.
  • When you turn on the Bluetooth feature of the TV, the TV will begin looking for other Bluetooth devices.
  • After the pairing process is finished, you will be able to utilise your headphones with the television.

It is possible that in some circumstances, you will be required to turn off the audio output coming from the TV speakers in order to obtain the output in the AfterShokz headphones.

Video Guide

How do you put AfterShokz headphones in pairing mode?

To activate the pairing mode, press and hold the volume+ button until Audrey says “pairing” and the LED indicator alternates between red and blue flashes. Launch the Bluetooth menu on your smartphone, then choose the headphones you want to use.” After a single blink of the blue LED indication, Audrey will remark that the connection has been made.

Why won’t my AfterShokz connect to Bluetooth?

The only thing that has to be done is to reset your headphones. 1) Before you begin, make sure your headphones are turned off and removed from the Bluetooth settings of your smartphone. 2) To enter pairing mode, press and hold the volume+ button for 5-7 seconds. This will take you into pairing mode. If you continue to hold down the button, your headset will switch on, and after a moment, the LED light will alternate between red and blue flashes.

How do I reset my AfterShokz Bluetooth?

Maintain simultaneous pressure on the button labelled “multifunction” as well as the buttons labelled “volume+” and “volume-” for a few seconds. You may experience sensations in addition to hearing sounds. Please remove your headphones and try again. Your headphones have been factory reset, and you may now link them with your smartphone again.

Conclusion

We are happy to assist you, and we hope that the information provided above has enabled you to successfully link your AfterShokz headphones with a variety of different electronic devices. If you are having problems with the AfterShokz headphones, try restarting them and determining whether or not they are functioning properly. In the event that they don’t, you may fix the majority of the problems with the wireless headphones by following the steps outlined above to manually reset them.

Leave a Reply

Your email address will not be published.