Physical Address

304 North Cardinal St.
Dorchester Center, MA 02124

How to Fix No Internet Secured Connection Error

Finding yourself confronted with the “No Internet, secured” message? Follow these steps to resolve a frequent wireless connection issue and reconnect to the internet.

Fixing problems associated with wireless networking in Windows 10 is often not difficult. On the other hand, there is a possibility that you may come across a notice that says “No Internet, secured.” This warning displays as a pop-up from the system tray.

This error indicates that there is an issue with the wireless connection or settings. Even though it’s annoying, this mistake can be fixed in a rather straightforward manner. Let’s take a look at eight different ways to resolve the “No Internet, secured” problem that Windows 10 displays.

What Does “No Internet, Secured” Mean?

It’s possible that you saw the error message appear in the notification area of the taskbar in Windows 10 at some point. Or maybe in the role of a notice. But what exactly does it imply when it says “No Internet, Secured”?

This error message seems to be especially ambiguous for Windows 10, however it often indicates that your internet connection is down. However, it is also possible for it to show up when you already have a connection that is active.

Confused? That shouldn’t come as a surprise. It seems that the inaccuracy was made on purpose to be ambiguous. In the end, it does not matter how well protected your computer is if it can no longer access to the internet since it will render the protection moot.

Even while it may show up on any device running Windows 10, it is more popular on Microsoft Surface tablets. Regardless of whether or not your computer uses a different network card or driver, you may still experience the issue. There are a variety of other circumstances that could result in the “No Internet, secured” error message being shown.

Fixing the “No Internet, Secured” Error

This unclear mistake has a few different solutions accessible to remedy it. Unfortunately, they are dependent on the configuration of your machine and the network adapter you use. As a consequence of this, not all of these solutions will work. However, we have put them in the order of probability, so you should just go through the advice in the order that they are presented.

  • Disable your VPN
  • Refresh the Windows 10 IP configuration
  • Reset Winsock
  • Check your PC’s connection properties
  • Disable IPv6
  • Set a New DNS Server
  • Update the network device driver
  • Run the Network Troubleshooter in Windows 10

1. Disable Your VPN

Have you ever linked your personal computer to a neighborhood Wi-Fi network, only to be met with the message “No Internet, secured”?

Don’t be concerned. If you are using a virtual private network (VPN), the built-in security mechanisms of the VPN client might be causing this issue. Specifically, it may be the kill-switch that is programmed to cut off your connection to the internet in the event that the VPN server becomes unavailable.

To determine whether or not this is the cause of the issue, you may try disabling your VPN (by utilizing the feature to disconnect) or even quitting the program completely. After then, reestablish your connection to the internet and go to a website that receives frequent updates, such as a news website.

If everything is able to connect successfully, the issue was likely with the VPN server. First, make sure you have the most recent version of your VPN software, and then connect to a different VPN server. You have successfully corrected the mistake if all of the connections work as expected.

2. Refresh the Windows 10 IP Configuration

Even when you are not using a virtual private network (VPN), do you still continue to get the “No Internet, protected” message? You have access to a few commands that will assist you in resolving the problem.

Click the Start button, then pick Windows PowerShell from the context menu. In this box, type the instructions in the following sequence:

ipconfig /release
ipconfig /renew

Your computer will be compelled to send a request to your local network for a new IP address once you do this. This will correct the mistake in the majority of instances.

3. Reset Winsock

Resetting Winsock is an additional command-line option that may be used to fix the “No Internet, secured” problem.

Winsock is really the Windows Sockets Application Programming Interface, despite the fact that its name sounds like a feature of your local airport. This is a standard for your personal computer’s communication with network services, more especially the TCP/IP protocol, which is extensively used.

The following command must be used in order to reset Winsock:

netsh winsock reset catalog

4. Check Your PC’s Connection Properties

Still no joy? It is time to inspect the network adapter on your own computer.

  • To access the settings screen, click the symbol that represents your Wi-Fi connection that is located in the system tray, and then choose “Network and Internet Settings.”
  • In this section, choose Change adapter settings, right-click the connection in question, and select Properties from the menu that appears. Check that the following are all ticked off:
  • Client for Microsoft Networks Client for Microsoft Networks File and Printer Sharing Client for Microsoft Networks
  • Internet Protocol Version 4, also known as TCP/IPv4, Internet Protocol Version 6, also known as TCP/IPv6,
  • Responder for the Discovery of Link-layer Topologies

Click OK to confirm. If you made any changes, restart Windows when prompted.

5. Disable IPv6

IPv6 is a new networking protocol that is intended to eventually replace IPv4, which is about to run out of available IP addresses. However, despite the fact that IPv6 should work on the majority of hardware, it is prone to failures.

You may deactivate IPv6 by doing the step that came before it again. To confirm your selection, uncheck the box labeled Internet Protocol Version 6 (TCP/IPv6) and then click the OK button. When asked, restart the Windows 10 computer you’re using.

6. Set a New DNS Server

The Domain Name System (DNS) is analogous to a phonebook found on the internet; however, it is fully automated and encompasses the whole planet. For instance, when you write “www.makeuseof.com” into the address bar of your web browser, the Domain Name System (DNS) translates that into an IP address and directs you to the website you requested.

However, there are situations when the DNS configuration that is set as default on your machine fails. Even if it isn’t always possible to tell for sure whether that is the reason for the “No Internet Secured” problem, it is still a solution that is worth attempting.

How to Fix No Internet Secured Connection Error
  • To access the settings screen, click the symbol that represents your Wi-Fi connection that is located in the system tray, and then choose “Network and Internet Settings.”
  • In this section, choose Change adapter settings, right-click the connection in question, and select Properties from the menu that appears.
  • Click on the “Properties” button under “Internet Protocol Version 4” (TCP/IPv4).
  • Check Please type these DNS server addresses onto your computer:
  • Preferred DNS Server: 9.9.9.9
  • Alternative DNS Server: 1.1.1.1
  • Tap the OK button.

7. Update Your Network Device Driver

It is recommended that you update the device driver for your network card since there is a possibility that it is the cause of the problem.

  • Click the Start button, then pick Device Manager from the context menu.
  • In this section, open Network Adapters, then right-click on the device that connects to your network, and pick the option to Update the driver.

After the device driver has been updated, please wait while Windows is restarted. In the event that the installation is successful, Windows 10 should immediately connect to the network as it does every time.

In the event that this does not work, you may try turning off the device, restarting the computer, and then enabling the device.

8. Run the Network Troubleshooter in Windows 10

Try this solution if you are still getting an error message that says “No Internet, secured” and the machine is still not connected to the internet.

Troubleshooting tools are software toolkits that automatically scan for faults and perform (or recommend) remedies. Windows 10 includes a number of these software toolkits.

Pressing the Windows key in conjunction with the letter I will access the Settings menu. From there, go to Network and Internet > Network troubleshooter to start the tool.

Follow the steps provided in the tool to repair your network connection.

Video Guide

Leave a Reply

Your email address will not be published.