Physical Address

304 North Cardinal St.
Dorchester Center, MA 02124

Best MTU Settings For PS4

If you are looking for the Best MTU for PS4, then you have arrived at the appropriate location. Nobody likes to deal with any kind of latency or problem that’s connected to the network. You want the experience to go as smoothly as possible, no matter what device you’re using or game you’re playing. You shouldn’t anticipate any lag or latency while playing games, especially on modern consoles like the PlayStation 4.

MTU is something to consider as a potential cause if you are experiencing difficulties of this kind while playing your preferred game on a PlayStation 4 system. You must be aware that adjusting your MTU settings might result in a more fluid gaming experience. Therefore, let me to acquaint you with the most effective MTU for the PS4. Continue reading if you want more information on the suggested settings for the MTU.

What is MTU?

MTU is an abbreviation for “Maximum Transmission Unit,” which is its full name. This provides information on the maximum quantity of data that may be carried across your network at one time. It is preset at 1500 bytes, and if you do not change any of the default settings, you will only be able to send a maximum of 1500 bytes of data over your network.

For a more fluid and lag-free gaming experience, several players recommend reducing the MTU to the recommended setting. Because of the reduction in MTU, the quantity of data being transmitted has decreased, which means that it will take less time for the data to reach its destination.

How To Alter MTU Value?

Before we get into which MTU setting is ideal for the PS4, we are going to walk you through how to modify the MTU value. To alter the MTU value, just follow the instructions that have been described below:

  • Navigate to the settings for your network on your PS4.
Best MTU Settings For PS4
  • Select the Internet Connection Setup option with your mouse. You will be asked if you are connected to the internet through a LAN or a Wifi network now.
  • There will be two choices available. One will be Simple, while the other will be Tailored to Your Specifications.
  • Select the Custom option from the drop-down menu, and then select Automatic from the next screen.
  • In the section labelled “DHCP Host Name,” choose “Do Not Specify,” and then select “Automatic” for the DNS setting.
  • Select the Manual mode from the drop-down menu located inside the MTU settings box.
  • On the next screen, change the MTU value to the one you want.

You must be familiar with the number 1473 if you are a regular user of the PlayStation 4 (PS4) gaming platform. The MTU value of 1473 is highly recommended by the vast majority of individuals. This is by no means a foolproof method, but there is a good chance that it will work in the majority of instances. Even if you set your MTU value to 1473, there is still a chance that your gaming may not be flawless. You have to look around for the most suitable MTU for your PlayStation 4.

What’s the Best MTU For PS4?

Do not choose well-known numerals like as 1470 or 1473, which are always being discussed. These figures may or may not provide a solution to your predicament. It is correct to say that they are a good match for the majority of the scenarios. We will walk you through the process of selecting the optimal MTU value for your PlayStation 4 (PS4). To determine which MTU setting is optimal for your PS4, follow these steps:

  • Launch the Settings menu on your PS4.
  • Select the Network option, then select the ‘Setup Internet Connection’ button.
  • Now, if you are connected to the internet through Wi-Fi, pick the option that says “Use WiFi.” Choose the option “Use a LAN cable” if the way you are connected is an Ethernet connection.
  • Select “custom” from the list of available choices.
  • Choose your preferred WiFi network from the list of networks that are accessible. You may skip this step if you are connecting your devices through a LAN connection.
  • Choose Automatic from the drop-down menus on the pages for configuring the IP Address and the DNS Settings.
  • Select Manual from the drop-down menu on the MTU settings page.
  • To input the new value for MTU, press the X key. It is recommended that you bring the value down by 28. You should enter 1472 as the value for the MTU if, for example, the default value is 1500.
  • If you choose Next, the PlayStation will do a test of the network connection. Make sure that the outcome of the exam stays fresh in your mind.

Now repeat the previous procedures, but this time bring the MTU value down by 28. Test the newly adjusted MTU number and continue to perform these steps until you get a notice stating that fragmentation is not supported after a test.

Another Way To Improve Connection

Even when you have the very finest MTU for PS4, there is no guarantee that your gaming experience will be completely uninterrupted. For some, there will undoubtedly be a discernible difference, while for others, not much will shift. There are more ways to strengthen the relationship you have.

For gaming, the majority of us suggested using a wifi connection. Yes, it is handy. However, it may cause your game to become sluggish at times. Because of this, it is highly suggested that an Ethernet connection be connected from your network to your PlayStation 4. This guarantees that the network link is both good and powerful.

Video Guide

What MTU is best for gaming?

The maximum transmission unit (MTU) size for all Point-to-Point Protocol (PPP) connections is 1500 bytes, but the default MTU size for VPN connections is 1400 bytes. Because IP/ICMP overhead takes up 28 bytes of this total, the effective maximum transmission unit size for this connection is 1472 bytes (1500-28).

What is the best setting for MTU

It is generally recommended that the MTU for a WAN interface connected to a PPPoE DSL network be 1492. In point of fact, while using auto MTU discovery, it was found that 1492 was the highest MTU that could be permitted. Having an MTU of 1452 is, nevertheless, the best possible value.

Why is MTU 1500?

Because ethernet connections currently make up the majority of the internet’s backbone, the maximum size of a packet has been informally fixed at 1500 bytes as a de facto standard in order to prevent packets from being fragmented as they travel down links.

Final Words

Nobody anticipates that their game may lag in the middle, particularly when they are playing it on their PlayStation 4. We have given you with all the information you need to choose the ideal MTU for PS4. I really hope that this information is of some use to you. If you have any questions, please ask them in the space below under “Comments.”

Leave a Reply

Your email address will not be published. Required fields are marked *