Physical Address

304 North Cardinal St.
Dorchester Center, MA 02124

Beats Headphones that no Longer Charge – How To Fix

Beats headphones are well-known for their stylish appearance, high levels of comfort, and excellent sound reproduction. On the other hand, they are subject to criticism on occasion about the quality of the components, which are seen as being of a middle or low end. However, just like any other electrical item, it is typical to have some kind of malfunction or breakdown at some point in time. When it comes to loading errors, however, they may soon become extremely bothersome. Find out what kinds of inspections and adjustments you may do to attempt to fix your Beats headphones if they will no longer charge.

First checks when your Beats headphones aren’t charging

There are a number of potential causes for the charging issue that your Beats headphones are now experiencing. The majority of the time, the problem will be a transient software error or a breakdown in the hardware coming from the helmet. There is also a possibility that the issue is with the power source, making it unrelated to the gadget in question. In this particular scenario, it is rather encouraging to learn that since it indicates that your Beats headphones are in excellent condition.

In order to arrive at a more accurate diagnosis of the cause of the issue, the following preliminary checks should be carried out:

  • To begin, check to see whether your Beats headphones are charging on a different power source.
  • Whether you have another power cable, you may test it to see if the first one is defective. Keep an eye out for any signs of damage to the cable, such as bare wires or melted plugs, since these may indicate a problem with the cable itself rather than the headphones themselves. It will have to be replaced if this is the case. Also, if you don’t use the original cord, there’s a chance the charger and your headset won’t work together. Use a branded or at least high-quality cable to prevent compatibility issues and minor charging glitches.
  • Even if the charging indication is not blinking, place your headphones on a lengthy charge (at least 1 hour). Try reactivating the headset and see if that helps.
  • The temperature of the room in which your Beats headphones are charging should be checked. The batteries in the helmets are protected from high temperatures by a feature we don’t usually realise is there. A room with a temperature range of -5°C to +40°C is not recommended. Keep it out of direct sunlight and away from windows that get sunlight. Your Beats headphones that no longer charge must be moved to an area where the temperature is sufficient for good operation if you find yourself in this position. After that, wait a few minutes before recharging your smartphone.

If your Beats headphones still don’t charge after following these simple steps, the problem is most likely a software or hardware issue with the headphones themselves.

What to do when your Beats headphones no longer charge?

The inability of your Beats headphones to charge might be the result of a software glitch that can be fixed by performing a factory reset, an electrical issue, or the breakdown of one of the headphones’ components. Find out what you should do if you find yourself in any of these predicaments.

Reset Beats Headphones

As we have just gone over, there is a possibility that a temporary software issue is causing your Beats headphones to not charge properly. In some cases, all that is required is a simple reset in order to get rid of the mistakes and malfunctions that are stopping it from charging regularly. Find out how to reset each of the most current versions of Beats headphones by reading the information that follows:

Note: If your helmet is not on this list, you can find the instructions on how to use it in the printed documentation that was given to you at the time of purchase, on the internet, or by contacting Apple Support

1 – Reset Beats Studio3 or Solo 3 wireless headphones

  • For the next ten seconds, hold down both the power button and the volume-down button simultaneously.
  • After the charging light begins its flashing pattern, you are free to let go of the buttons.

Then you should attempt to charge your Beats headphones. If that solves the problem, make sure they are completely charged and then try turning them back on. After that, it will be necessary for you to reconfigure it with your devices.

2 – Reset the Beats Solo Pro headphones

  • While doing so, press and hold the mode button as well as the volume down button for a full minute.
  • When the light begins flashing red, you may let go of the buttons.

Then you should try charging your headset once again, after which you should switch it back on and adjust its settings.

3 – Reset the Studio headset

The process to reset the Studio wireless headphones is the same as the previous one:

  • Keep your finger on the button labelled “power”
  • After a few seconds, you may let go of the button.
  • If everything went according to plan, the charge level indicator lights should alternate between white and one red flash every three seconds.
  • As soon as the lights on the headset cease flashing, it has to switch itself back on automatically.

4 – Reset Beats Solo wireless headphones

The following steps must be carried out with the Beats Solo wireless headphone switched off in order to complete the reset procedure:

  • While holding down the multifunction buttons (power, call on, call off), as well as the volume button, press concurrently for ten seconds.
  • If everything went according to plan, the red and blue lights will each light up three times.

5 – Reset Beats Solo2 wireless headphones

In this step of the process, you must carry out the steps without having the headset linked to the USB charging cable:

  • Hold the button that controls the power for ten seconds as you press and hold it.
  • Put the button back in its place.
  • If everything went according to plan, the charge level indicator lights should alternate between red and white three times.

Contact a professional repairer or after-sales service

Unfortuitously, if the reset did not fix the problem and your Beats headphones are still unable to charge, the issue most likely lies with either the battery or the charging port of the headphones, despite the fact that this is a less common occurrence.

In point of fact, eventually the batteries inside of any gadget will run out of juice and need to be replaced. After then, their autonomy may be lost, or they may just cease charging overnight. There is also a possibility that there is an issue with the headphones’ connection, which would result in the battery losing power. Lastly, there is a possibility that the charging port as well as the connections that attach the charging cord to the headset are broken.

In any event, these issues demand electrical expertise since it will be essential to remove the helmet, test the different components, and then replace the one that is bad with a new one when it has been identified. You not only run the chance of doing major damage to your helmet, but you also run the risk of being electrocuted.

At this point, you will need to get in touch with Apple Support first, particularly if your Beats headphones are still covered by their manufacturer’s guarantee. After that, you will be able to get a specialised answer. If the gadget is one that is covered by the guarantee, then you will not be required to pay to have the helmet fixed. After the warranty on your device has expired, you will be presented with the option to purchase a repair package. The cost to replace the battery is around ninety euros.

In the event that the warranty on your Beats headphones has expired and they have stopped charging, you have the option of getting in touch with an independent and competent repair service instead. Be wary, however, that he utilises excellent replacement parts in order to prevent any other malfunctions or the recurrence of the same issue a few months later…

Video Guide

Can Beats battery be replaced?

Out-of-warranty battery servicing is something we can do for a cost if the problem you’re having with your battery isn’t covered by the warranty. If your qualified Beats headphones or earphones’ batteries contain less than 80 percent of their original capacity and you have AppleCare+ for Headphones, you are covered for a replacement under the terms of that coverage.

Do Beats have a lifetime warranty?

Are Warranties Included With Beats Headphones, and If So, What Does the Coverage Entail? As is the case with the majority of Apple’s goods, Beats headphones come with a manufacturer’s warranty that covers any defects or damage that can be attributed to the company that produced them for a period of one year.

Do Beats headphones take batteries?

Instead of deriving all of their power from the headphone port to which they are attached, the Beats by Dre headphones employ two AAA batteries as a power source. This allows them to provide a far higher level of sound quality. These batteries are also responsible for powering the noise-cancellation component of the headphones, which helps to filter out ambient noise while music is being listened to.

Leave a Reply

Your email address will not be published. Required fields are marked *